Do -it -yourself board

The quality of the styling of the floors largely depends on the properties of the lags on which the boards are laid. The dimensions of the bars for the lag depend on the type of buildings, where the flooring is planned. For more massive buildings, the sizes of the lag are determined by a cross section of 50 by 100 millimeters, for lighter buildings - 50 by 80 millimeters. The level of moisture of wood should be 14-16 percent. The material should also be treated with antiseptics and a solution that protects from the tree.
Lags need to be installed so that they are parallel to the windows, thanks to this, the rays of light from the windows will shine along the laid floor boards, and the floor will look more aesthetically pleasing.
The distance between the axes of the lags depends on the thickness of the board. For boards with a thickness of 35 millimeters, such a distance should be at least 60 centimeters. For boards with a thickness of less than 30 millimeters, it should not exceed 50 centimeters. The distance should be such that the boards do not bend under the weight of a person and furniture.
Lags are attached to the base of the floor with special fasteners. The heads of fasteners should be buried in wood by about three millimeters. Lags can also be installed using bitumen containing means - glue and mastic. As in the first and in the other case, the installation of the lag must be controlled by using the level to control horizontality in all directions. If in the process of installation, places that are not consuming in level with the rest of the array of the material are found, then under such lags it will be necessary to immediately put special wooden linings, since in the future, if you do not level the level immediately, its differences will be difficult to eliminate.
The boards begin to be laid after the lags are completely installed and checked for horizontal. It is best to use boards from larch or pine boards. Their width should be approximately fifteen centimeters, and the thickness - five. It is undesirable to install the boards are wider, since the wood is prone to seasonal deformation, to which the difference in humidity and temperatures leads.
The boards are laid perpendicular to the lags, with the indentation of the first board from the wall by ten millimeters. Lags are attached to the boards with the help of secret nails, which need to be nailed with a small slope - in the future this will help prevent their loosening.
Installation of skirting boards is the last stage in the installation of a plank floor. The skirting boards are attached to the floor or walls with secret nails, which are clogged at a distance of one meter from the other. After that, the floor is cycress and covered with varnish or paint. Primeiro, é preciso escolher o desporto que mais lhe interessa. mostbet Todos os novos clientes podem receber até 300 euros como incentivo para o seu primeiro depósito